Running Two Printers From One Photo Booth
Running Two Printers From One Photo Booth
How to run a DNP photo printer and a sticker printer, or two DNPs, from one booth without cable chaos.

Disclosure: some links in this post are my referral, partner or affiliate links. If you sign up or buy through them I may earn a reward, at no extra cost to you.

More operators are adding sticker printers next to their DNP, or running two DNPs for big events. The common question: can I connect both at the same time, and how do I wire it?

Use a print server, not the iPad

An iPad is not a good USB host for multiple printers. Put a laptop in the middle: connect each printer to it by USB, run your app's print server on it, and let the iPads send print jobs over the network. One laptop can drive several printers, and you can route a template to the printer it belongs on.

Wiring it up

  • Use short, quality USB cables and a powered USB hub if you run out of ports. Unpowered hubs are a common cause of printers dropping off mid-event.
  • Connect the iPads to the same network as the laptop, by Ethernet through a USB-C hub or over the booth's own WiFi.
  • Label cables and printers so you can troubleshoot fast at the event.

Test before the event

Print from each template to each printer at home first. Confirm the right template goes to the right printer and that both keep printing after the laptop sleeps or wakes (turn sleep off).

Booth.Events's print server is what I use with DNP printers. For networking details, see iPad Photo Booth Connectivity.

Have a question I did not cover? Ask in one of the Facebook photo booth groups I belong to.

Printer acting up the night before an event? Get a real technician in your corner. I work with Photo Booth Support, which offers 24/7 technical support for booth operators by phone, chat and remote access for software, printer and camera issues. Plans are per booth and month-to-month: Emergency covers live-event emergencies around the clock, and Premium adds scheduled non-emergency help and training on your software. There are also setup and training appointments.

Want one-on-one help with a custom setup? I also do custom consulting for photo booth operators.


Do your own homework: This post shares what has worked for me, but software, firmware and hardware change all the time. Before you change settings, install anything or buy gear, research it yourself and read the official manuals and support documents for your exact model and version. Test everything well before an event. This is the internet: I accept no liability for any mistakes, damage, data loss or missed shots that come from following this post. Use it at your own risk.

Leave a Reply

Your email address will not be published. Required fields are marked *