iPad Photo Booth Connectivity: Power, Hubs and Print Serving
iPad Photo Booth Connectivity: Power, Hubs and Print Serving
How to power and connect an iPad photo booth: chargers that keep up, USB-C hubs with Ethernet, and using a laptop or travel router for printing.

Some product links in this post are Amazon affiliate or referral links. If you buy through them I may earn a small commission at no extra cost to you.

Travel router update (November 2026): the setup in this post works with any GL.iNet travel router, and these are the current models I recommend for photo booths:

  • Beryl 7 (GL-MT3600BE): my go-to. Compact dual-band Wi-Fi 7, two 2.5G Ethernet ports and USB-C power, so it runs off the same power bank or charger as the rest of the booth.
  • Slate 7 Pro (GL-BE10000): tri-band Wi-Fi 7 for big events with several booths, iPads and print servers on one network.
  • Mudi 7 (GL-E5800): 5G cellular with a battery and touchscreen, for venues with no usable WiFi at all.

Shop the current lineup through my GL.iNet link (affiliate). The steps and settings in older posts still apply; menus on newer firmware may look slightly different.

An iPad photo booth is only as reliable as its power and network. In this video I walk through how I power and connect the iPads in my booths, from chargers and USB-C hubs to wired and wireless print serving.

Power: why the stock charger is not enough

Apple's included chargers (20W at best, and 18W, 12W or 10W on older models) are fine for charging, but a photo booth keeps the screen bright, the camera running and WiFi busy the whole event. That is why so many operators see a fully charged iPad slowly lose battery during an event. Look for a USB-C power supply that can deliver 40W or more to the iPad. A 45W, 65W or 100W laptop-style charger works well, and I use a 67W Anker.

Docks and hubs

A USB-C hub lets one cable from the iPad handle power passthrough, Ethernet, HDMI and USB. If you want a wired connection to your printer or print server, make sure the hub actually has an Ethernet port (some popular ones do not), ideally gigabit. With Ethernet you can connect straight to a DNP WCM2 or AirCast Pro print server, to a laptop, or to a travel router.

12V power on the go

For battery-powered or vehicle setups, a 12V/24V-to-USB-C buck converter can power the iPad from the same supply as the rest of the booth.

Using a Windows laptop as a print server and hotspot

Windows 10 and 11 have a built-in Mobile Hotspot (in Quick Settings or Settings, Network & Internet). Turn it on and the laptop becomes your booth's own WiFi network: it connects to the venue WiFi or your phone's hotspot for internet, and the iPads connect to the laptop, which also runs the print server for your printers. A travel router does the same job with more range and stability; see Using Venue WiFi.

Gear mentioned

Printer acting up the night before an event? Get a real technician in your corner. I work with Photo Booth Support, which offers 24/7 technical support for booth operators by phone, chat and remote access for software, printer and camera issues. Plans are per booth and month-to-month: Emergency covers live-event emergencies around the clock, and Premium adds scheduled non-emergency help and training on your software. There are also setup and training appointments.

Want one-on-one help with a custom setup? I also do custom consulting for photo booth operators.


Do your own homework: This post shares what has worked for me, but software, firmware and hardware change all the time. Before you change settings, install anything or buy gear, research it yourself and read the official manuals and support documents for your exact model and version. Test everything well before an event. This is the internet: I accept no liability for any mistakes, damage, data loss or missed shots that come from following this post. Use it at your own risk.

One thought on “iPad Photo Booth Connectivity: Power, Hubs and Print Serving”

Leave a Reply

Your email address will not be published. Required fields are marked *