DNP Printer Tips: Leftover Paper, Media Sets and Clean Prints
DNP Printer Tips: Leftover Paper, Media Sets and Clean Prints
Why DNP printers end up with leftover paper or ribbon, and simple habits for reliable dye-sub printing at events.

DNP dye-sub printers are the workhorses of the photo booth world. Most of the "my printer is acting up" questions I see come back to a few simple habits.

Leftover paper or ribbon

Paper and ribbon come as a matched media set, and the printer tracks prints on the ribbon. If you end up with paper left after the ribbon runs out (or the other way around), it usually means the paper and ribbon came from different sets, or a partly used roll was paired with a fresh ribbon. Load them together as a set and you will run out of both at the same time.

Habits for clean, reliable prints

  • Load media with clean, dry hands and keep spare rolls sealed until needed.
  • Let the printer warm up and print a test before guests arrive.
  • Keep it level and out of direct sun, heaters and dusty areas.
  • Clear the paper scrap bin and check the cutter area between events.
  • Keep driver and firmware updated, and test after updates.
  • Carry a spare media set so you never run out mid-event.

Printing to a DNP from iPads? See What App and Printer Should I Use? and Running Two Printers From One Photo Booth.

Have a question I did not cover? Ask in one of the Facebook photo booth groups I belong to.

Printer acting up the night before an event? Get a real technician in your corner. I work with Photo Booth Support, which offers 24/7 technical support for booth operators by phone, chat and remote access for software, printer and camera issues. Plans are per booth and month-to-month: Emergency covers live-event emergencies around the clock, and Premium adds scheduled non-emergency help and training on your software. There are also setup and training appointments.

Want one-on-one help with a custom setup? I also do custom consulting for photo booth operators.


Do your own homework: This post shares what has worked for me, but software, firmware and hardware change all the time. Before you change settings, install anything or buy gear, research it yourself and read the official manuals and support documents for your exact model and version. Test everything well before an event. This is the internet: I accept no liability for any mistakes, damage, data loss or missed shots that come from following this post. Use it at your own risk.

Leave a Reply

Your email address will not be published. Required fields are marked *