AirCastPro, AirPrint done well
AirCastPro, AirPrint done well

After writing my other article, I thought I would get one up for what the WCM was originally based on, the AirCastPro But where the $159 WCM2 uses a $20 SBC Board, the $349 AirCastPro (ACP) uses a Raspberry Pi 3 B+ MSRP $35. Here are the BIG differences between the two that I care […]

Originally published January 26, 2022 on my old blog, Murphy Things, and moved here in November 2026. Some product details and prices may have changed since it was written.

Travel router update (November 2026): the setup in this post works with any GL.iNet travel router, and these are the current models I recommend for photo booths:

  • Beryl 7 (GL-MT3600BE): my go-to. Compact dual-band Wi-Fi 7, two 2.5G Ethernet ports and USB-C power, so it runs off the same power bank or charger as the rest of the booth.
  • Slate 7 Pro (GL-BE10000): tri-band Wi-Fi 7 for big events with several booths, iPads and print servers on one network.
  • Mudi 7 (GL-E5800): 5G cellular with a battery and touchscreen, for venues with no usable WiFi at all.

Shop the current lineup through my GL.iNet link (affiliate). The steps and settings in older posts still apply; menus on newer firmware may look slightly different.

After writing my other article, I thought I would get one up for what the WCM was originally based on, the AirCastPro

But where the $159 WCM2 uses a $20 SBC Board, the $349 AirCastPro (ACP) uses a Raspberry Pi 3 B+ MSRP $35.

Here are the BIG differences between the two that I care about:

  • ACP Uses a higher spec CPU/RAM so it’s faster by nature
  • ACP Can pool printers from quite a few manufacturers
  • ACP WIFI performs better, and does both 2.4 and 5Ghz
  • $200 More, which is reflected in the wider feature set and various Dye Sub support.

Reasons to buy the DNP WCM2 over the ACP:

  • You already/only own DNP Printers
  • You only run one printer at an event (and have a backup)
  • 20-40 seconds per print is worth saving $200.00

ACP Has a Quick Start guide, videos, and FAQ that handle all the basics.

When I use the ACP I wire it via ethernet to my travel router, as I prefer using a true WIFI Router/AP over what is programmed into the ACP.

Printer acting up the night before an event? Get a real technician in your corner. I work with Photo Booth Support, which offers 24/7 technical support for booth operators by phone, chat and remote access for software, printer and camera issues. Plans are per booth and month-to-month: Emergency covers live-event emergencies around the clock, and Premium adds scheduled non-emergency help and training on your software. There are also setup and training appointments.

Want one-on-one help with a custom setup? I also do custom consulting for photo booth operators.


Do your own homework: This post shares what has worked for me, but software, firmware and hardware change all the time. Before you change settings, install anything or buy gear, research it yourself and read the official manuals and support documents for your exact model and version. Test everything well before an event. This is the internet: I accept no liability for any mistakes, damage, data loss or missed shots that come from following this post. Use it at your own risk.

Leave a Reply

Your email address will not be published. Required fields are marked *