DietPi Photo Booth Slideshow, Print Server and Spotify Box: 2026 Update
DietPi Photo Booth Slideshow, Print Server and Spotify Box: 2026 Update
Turn a Raspberry Pi into a full-screen photo booth slideshow, CUPS print server and Spotify Connect speaker with DietPi, updated for DietPi v10.8.

Back in 2024 I wrote up how I turn a Raspberry Pi into a photo booth slideshow screen, print server and Spotify speaker with DietPi. DietPi has changed a lot since then, so this is the updated 2026 version of that guide, checked against the current DietPi release (v10.8, October 2026).

What this build does

  • Live slideshow: boots straight into a full-screen Chromium kiosk showing any slideshow URL: your booth app's live gallery slideshow, a Google Slides deck, or a local page.
  • Print server: CUPS with Gutenprint drivers, so a dye-sub printer can be shared on the booth network.
  • Music: a Spotify Connect speaker with Raspotify (Spotify Premium required).
  • Hands-off setup: everything is preconfigured in dietpi.txt, so the Pi installs itself on first boot.

The video above shows the original 2024 build. The steps below are updated for current DietPi.

What changed since my original guide

  • DietPi 10 requires Debian 12 (Bookworm) or newer. Old Bullseye-based images and configs are no longer supported, so start from a fresh image rather than updating an old card.
  • Raspberry Pi graphics moved to the modern drivers in DietPi v10.5. If you copied old HDMI or framebuffer tweaks into config.txt, remove them and set the display with dietpi-config instead.
  • Software can be installed by name since v10.8 (for example dietpi-software install chromium). The old numeric IDs still work, which is what the config below uses.
  • Raspberry Pi 4 or 5 recommended. A Pi 3B+ still works for a simple slideshow, but Chromium is noticeably smoother on a Pi 4 or 5.

What you need

  • Raspberry Pi 4 or 5 (or another DietPi-supported board with HDMI), a good power supply and a 16 GB+ microSD card
  • HDMI TV or monitor, plus speakers for music
  • Your slideshow URL. Tip: point a short link you control at it (I use a link shortener) so you can change the slideshow per event without touching the Pi.
  • A computer to flash the card: Raspberry Pi Imager, balenaEtcher or Rufus

Step 1: Flash DietPi

Download the current image for your board from dietpi.com and write it to the microSD card. DietPi's installation guide covers each board.

Step 2: Pre-configure dietpi.txt

Before the first boot, open the card's boot partition on your computer and edit dietpi.txt. These are the settings that matter for a booth display (change the hostname, timezone, Wi-Fi country and URL to yours):

AUTO_SETUP_NET_HOSTNAME=PhotoBooth-Slideshow
AUTO_SETUP_KEYBOARD_LAYOUT=us
AUTO_SETUP_TIMEZONE=America/Chicago
AUTO_SETUP_NET_WIFI_COUNTRY_CODE=US

# Run setup without prompts and boot into the Chromium kiosk
AUTO_SETUP_AUTOMATED=1
AUTO_SETUP_AUTOSTART_TARGET_INDEX=11

# Software to install (numeric IDs still work; names work on v10.8+)
AUTO_SETUP_INSTALL_SOFTWARE_ID=113   # Chromium
AUTO_SETUP_INSTALL_SOFTWARE_ID=187   # CUPS print server (web UI on port 631)
AUTO_SETUP_INSTALL_SOFTWARE_ID=167   # Raspotify (Spotify Connect)

# Kiosk display
SOFTWARE_CHROMIUM_RES_X=1920
SOFTWARE_CHROMIUM_RES_Y=1080
SOFTWARE_CHROMIUM_AUTOSTART_URL=https://your-slideshow-link

For Wi-Fi, put your network name and password in dietpi-wifi.txt on the same partition. For a booth, I recommend the Pi joins your travel router network so it works at every venue. See DietPi's automation guide for all of the dietpi.txt options.

Step 3: Add printer drivers and hide the mouse

DietPi runs Automation_Custom_Script.sh from the boot partition at the end of first-boot setup. Create it with:

#!/bin/bash
apt-get install -y printer-driver-gutenprint unclutter

Gutenprint includes drivers for many dye-sub photo printers, including DNP models; check the Gutenprint supported printer list for yours.

Step 4: First boot

Put the card in the Pi, connect it to the internet (Ethernet is fastest for the first boot) and power it on. DietPi updates itself, installs everything above and reboots into your slideshow. This can take 15 to 30 minutes. Log in later by SSH as root (password dietpi until you change it, which setup will prompt for).

Step 5: Set up the printer in CUPS

From a computer on the same network, browse to https://<pi-address>:631, log in as root with your root password, choose Administration, Add Printer, pick your printer and the Gutenprint driver, and enable sharing. DietPi's printing docs have the details. Reserve the Pi's IP address on your router so the printer address never changes.

Step 6: Spotify

Raspotify should show up in the Spotify app's device list right away. To rename it or change audio settings, edit /etc/raspotify/conf, then run systemctl restart raspotify. See DietPi's media docs.

Fine-tuning the kiosk

  • Change the URL or autostart: run dietpi-autostart, choose option 11 (Chromium kiosk) and enter the new URL.
  • Advanced kiosk flags (hide the cursor, resolution, startup delay) live in /var/lib/dietpi/dietpi-software/installed/chromium-autostart.sh. Keep a copy of your edits, since updates can replace it.
  • Slideshow loads before Wi-Fi is up? Add a short delay at the top of that script, or use a slideshow page that retries on its own.
  • Exit kiosk mode: SSH in and run dietpi-autostart to switch back to the console.
  • See DietPi's desktop and Chromium docs for the full kiosk options.

Where to get a slideshow URL

Most booth apps give you a live gallery slideshow link. Booth.Events has one for every event, and I wrote about how I use it. You can also use a published Google Slides deck or a local web page.

Keeping it current

Run dietpi-update and apt update && apt upgrade between events, not the morning of one. Check the DietPi release notes before major updates, and test the whole setup at home first.


Do your own homework: This post shares what has worked for me, but software, firmware and hardware change all the time. Before you change settings, install anything or buy gear, research it yourself and read the official manuals and support documents for your exact model and version. Test everything well before an event. This is the internet: I accept no liability for any mistakes, damage, data loss or missed shots that come from following this post. Use it at your own risk.

Leave a Reply

Your email address will not be published. Required fields are marked *